Gas Monitoring For Underground Mining

kristian Gas Monitor, Mining, Underground Mining
Gas Monitoring For Underground Mining

Gas monitoring for Underground mining has been an essential part of the mining industry since the early days of mining. Long gone are the days of canaries in coal mines. These days, gas monitoring is a critical part of mining operations, and the stakes are high. A gas leak can be catastrophic, leading to loss of life, damage to equipment, and interruption of operations.

 

Becker Mining Systems’ smartsense® line is a comprehensive solution for gas monitoring in mining operations. The smartsense® line includes a variety of sensors, controllers, and software that work together to provide real-time data on gas concentrations in the air. The system is designed to be scalable, so it can be tailored to the specific needs of any mining operation.

 

The most popular solution in many modern mines today is the use of a single gas monitoring device. These small and compact instruments are instantly compatible in your mining site and there’s no need for complex programming or troublesome calibration. The integrated device is very reliable and low-maintenance due to its design according to strict international standards.

 

The smartsense® line of products has been designed specifically for the needs of the modern mine. Atmospheric and environmental monitoring is a critical part of mining operations, and the smartsense® line offers a comprehensive solution a handheld and wireless module. 

 

These devices can run on the VHF and UHF line as well as provide data transfer support for fast alerts to your control center. Having these handheld options is fantastic but when they automatically log and come with many of the tools that you expect to find in a more sophisticated sensor-based system, it is a no-brainer to seek out one of these systems to quickly integrate into your mine. 

 

These wireless devices can easily connect with the current communication systems that you have in place and they are also available to work in some of the most hostile environments across your mining site. If you have areas where it would typically be difficult to monitor, this is an easy device that you could use attached to equipment or  in other places that might be hard to get to.

 

Expansion models are available and there are other devices that can also link alongside the gas monitoring tool. With an easy-to-read screen as well as advanced reporting for your gas monitoring needs, these are  the most popular models on the market. 

 

The SSFM-100 from the smartsense® line is one of the most advanced handheld atmospheric monitors that is currently available. It’s a great choice for those who want an all-in-one solution for their gas monitoring needs. The device is rugged and durable, and it’s been designed for use in even the most hostile environments. With a variety of features and an easy-to-use interface, the SSFM-100 is the perfect choice for any mining operation.

 

Contact us today if you are interested in using gas monitoring for underground mining. Our team is available to help with troubleshooting this device set up and  to provide any other support that you might need.

UHF IS Communications System

kristian Leaky Feeder Systems, Mining Communication, Underground Communication
UHF IS Communications System

The Becker UHF IS communications system is  a two-way radio communication system that increases safety and production. The system has data, telemetry and video capability. It’s simple to maintain and use. The Becker UHF IS communication system is a highly dependable and durable engineering design.

 

The Leaky Feeder system allows miners to communicate throughout the mine over standard commercial two-way radios. The Becker UHF IS communication system is an Intrinsically Safe (I.S.) Leaky Feeder system that is used to monitor and control electrical equipment such as fans and pumps. 

 

Becker UHF IS communication system is reliable, tough, and easy to use. It’s been designed with the user in mind. The system is also very affordable without compromising quality or performance. This is a system that can be put in place in any mining site and help you continue to maintain clear communications even through narrow tunnels or around large obstacles.

 

The range of the system is impeccable. You can communicate surface to underground and vice versa with ease. The system is also easily expandable so you can add more users as your needs change. The devices running on this leaky feeder system are capable of communicating with one another up to several kilometers.

 

Using a leaky feeder system as well as a line amplifier,  you can bolster your signal throughout a mining site and make sure that you can add in a series of additional supports like monitoring, data transmission, and more. 

 

This system is very popular in the mining industry as it is an extremely cost-effective way of providing communication in difficult and dangerous environments. It is also used in other industries such as construction, railway, and tunneling. Cables can be run throughout the mining site with amplifiers every 350 m for optimal coverage and compatibility with devices ranging from communication to monitoring and alarms. 

 

Repairs and maintenance of the system are easily completed by qualified personnel. The system is also backed by a comprehensive warranty. The cable can expand and be added to as the mine develops, ensuring ease of use with further expansions and quality communication as any mining site grows. 

 

We can help you get started with the best in leaky feeder communications devices, lines, and throughout the setup process. Our teams can help you troubleshoot the setup process for your mining site as well as integrate your communications system with other systems on site. With our support, you can be sure that your Becker UHF IS communication system will provide you with the clear, quality communications that you need to maintain a safe and productive mining operation.

 

The UHF IS communications system from Becker Mining is the ideal way to improve safety and efficiency in your mining operation. It is simple to use and maintain, affordable, and offers a range of features and benefits that make it the perfect solution for your needs.

 

The Becker UHF IS communication system is the perfect solution for your business or organization. Contact us today at Becker Wholesale Mine Supply to find out more about this amazing product!

SmartCOM Leaky Feeder Wifi

kristian Mining, Mining Communication
SmartCOM Leaky Feeder Wifi

One of the new ways that Becker has been moving into new markets is by applying their developments that have been traditionally used in coal and ore mining to other industries. Recently, they completed a project in Novomoskovsk where they implemented the SmartCom Wi-Fi system. This is a unique development of Becker Group that is already having success in various applications. Here we will learn all about SmartCOM Leaky Feeder Wifi.

 

The SmartCom Wi-Fi system is a leaky feeder wifi system uses low frequency electromagnetic signals to provide wireless coverage in difficult or dangerous environments. It is already being used successfully in mines, tunnels, and other challenging industrial settings. The Novomoskovsk project was the first time it had been used in a commercial setting, and it was a resounding success. 

 

This newest form of Wifi communication offers 100% coverage of the work area, and can pinpoint the location of personnel with an accuracy of 10 meters. The same Wi-Fi protocol allows the dispatcher to communicate with anyone who is in the mining complex, regardless of where they are. 

 

This is a major breakthrough for safety and efficiency in the mining industry, and it is only the beginning of what the SmartCom Wi-Fi system can do. 

 

Becker Mining Systems is at the forefront of developing new and innovative ways to keep people safe and connected in even the most challenging environments. The SmartCom Wi-Fi system is just one example of their commitment to improving safety and efficiency in the mining industry. With these forms of communication and data transfer built into mining sites across the world, we can see  a future where mines are not only safe, but productive and connected places.

 

One of the best aspects of this mining Wifi system is that it can be easily integrated into a mining site through existing leaky feeder lines.  This means that there is no need to run new cables or make any major changes to the infrastructure of the site. This makes it a very attractive option for companies who are looking to improve safety and efficiency without incurring a lot of extra costs. 

 

Becker Mining Systems is a global leader in providing advanced engineering solutions for the safe, productive, and connected mine of the future. It has now been over 2 years since the implementation of this project and Becker Varis is working towards implementing these products into multiple mining sites across the world. As we see this wifi technology integrated into leaky feeder lines worldwide, we can see greater data improvements and maintenance in mining as well as enhanced safety and connectedness in the mining environment. 

 

The SmartCom Wi-Fi system is just one example of how Becker is using its experience and expertise in mining to enter new markets and provide innovative solutions to customers in a variety of industries. With a commitment to quality and customer service, Becker is poised to continue its success in the years to  come.

 

If you are interested in learning more about  Becker Mining and the SmartCOM leaky feeder wifi system, please visit the website or contact Becker communications today.

Becker Will Build Longwall Roof Supports In US

kristian Uncategorized
BECKER WILL BUILD LONGWALL ROOF SUPPORTS IN US

Bristol, Virginia-based Becker Global America has secured its first contract to manufacture powered roof supports for longwall mining in the U.S. The company said the shields would also be supported locally.

“We have lots of work in front of us, but couldn’t be more proud of our team and especially being able to bring this to the U.S.,” said Justin Tidd, chief sales officer for Becker Global America.

This is a significant announcement for the U.S. subsidiary of Becker Mining Systems, which has been supporting mines with increasingly sophisticated electrical controls and distribution systems. The parent, which is based in Freidrichstal, Germany, has a division in Swierklany, Poland, (Becker-Warkop) that has manufactured longwall mining equipment for more than 30 years.

Becker VHF Bi Directional Amplifier

kristian Mining, Mining Communication, Product Review
Becker VHF Bi Directional Amplifier

Becker Varispeed VHF Bi-Directional Amplifier is typically to compensate for Leaky Feeder Cable longitudinal losses in both directions simultaneously, we install compensating currents in Mining, Shipping, Tunneling, Motorway and In-Building radiating cable systems.

 

In these heavy industries, communication remains important and preventing accidents can help to save lives and prevent damage to equipment. 

 

The Becker Varispeed VHF Bi-Directional Amplifier is a tough, dependable, and easy-to-install option that will ensure clear and consistent communication in all sorts of harsh circumstances.

 

The goal of this solution is to keep up communication and ensure proper warning in the event of collisions, mine site dangers, and more. Through a superior quality of connection, alarm, and warning system, this is a product that can protect miners and save equipment. 

 

The amplifier in this product offers the lowest possible noise contribution to an already weak RF carrier when operating in collocation with a strong carrier.

 

The connectors have been designed for ease of connection making installation and repair as convenient as possible.

 

The Power Source required from the Leaky Feeder cable is 8V to 17Vdc. The Varispeed UHF BDA is also available with an optional Power over Ethernet (PoE) Injector.

 

The Becker Varispeed VHF Bi-Directional Amplifier is the perfect solution for maximizing performance in UHF bi-directional communications systems. With its low noise contribution and ease of installation, the Varispeed UHF BDA is the ideal choice for ensuring clear and reliable communication in any UHF bi-directional system.

 

There are multiple channels for simultaneous voice and data transfer. Having the crucial ability to communicate on several channels or share data amongst a mining site can ensure that everyone is always aware of potential dangers. 

 

This product operates on two principle: 1. The received signal from one direction is amplified and injected into the other direction to serve as a “talk-back” function and 2. The amplifier in this product offers the lowest possible noise contribution to an already weak RF carrier when operating in collocation with a strong carrier.

 

The device also comes with an LED indicator as well as an OLED display. These features allow for quick and easy diagnosis of any potential problems. indications on the screen will help with the selection of channel features or to simply see alerts as they occur. 

 

Information collected on the device or warnings can also be cataloged and stored on the CATS database. The database is accessible by computer and can offer a variety of ways to view the data including tabular form, trend form or as a graphical display on a map.

 

The Becker Varispeed VHF BDA is the perfect solution for ensuring clear and reliable communication in any UHF bi-directional system. With its low noise contribution and ease of installation, the Varispeed VHF BDA is the ideal choice for maximizing performance in UHF bi-directional communications systems.

 

If you are looking for reliability and improved communications on your mining site, these are the perfect devices for you!  For more information on this product, please contact our sales department at Becker Wholesale Mine Supply.